Chassis 6.50 meters long from 300 NPU, side wings are 80 NPU and 3×4 tear patterned sheet metal is used.
Tower: 10.5 meters of 80x80x5mm and 50x50x5mm profile material.
Deck engine: 165HP-195HP single motor is used.
Gearbox: 3 rows of 1” chain gear, 1 input 4 output, aluminum body 85 or 90 ZF transmission is used.
Drawworks: 30 tons pulling capacity with 3+3 lining and 4 winding ropes.
Rotary: Inner diameter is 235mm.
Centrifugal pump: Centrifugal with 4” outlet (SP2 DIYAP brand)
Swivel: 30 tons capacity and 2″ R2 absorbent hoses are used.
Kelly: 120×120 four corner dimensions are used.
Rope: Hemp core and min. 16 mm thickness is used.
Alternator: 35 KW power alternator is used.
Shaft: Man and Mercedes shafts are used.
All clutches are pneumatic moving.
The whole system panel is controlled from where the sonde is working.
The pump to be used in foam pressing for the pneumatic system is min. 80 Lt/min capacity triplex circulation pump resistant to 40 bar pressure is used.
Hydraulic control system will be operated by using a pump with a speed of at least 80 Lt / min. 2 tower lifts, 4 foot lifts and 2 skid lifts.
Tong wrenches, maneuvering head, intermediate handles, male rescue (guide) are supplied with the drilling rig.
Machine lighting system is placed to illuminate the entire perimeter of the drilling rig.
Warning and safety signs are mounted in the necessary areas on the machine.